How To

How to fix The hosted network couldn’t be started

Fix hosted network couldn’t started Some People This Problem the hosted network couldn’t be started. Whenever we tried to start the hosted network, Windows ended itself with this error: I was solutions for you how to make a computer a Hotspot. Here is 4 methods solutions for The hosted network couldn’t be started:

The hosted network couldn’t be started. The group or resource is not in the correct state to perform the requested operation.

 

Method 1: At first you check the Hosted network supported

Step 1: Open Command Prompt Admin and type: netsh wlan show drivers

Step 2: Shows Hosted network supported: Yes

Step 3: If you continue to guide and your support Hotspot.

 

Note: Shows Hosted network supported: No , You need update to Latest windows version in your computer and Driver Go to  Device manager, Click View – Click – show hidden device Select Network Adapters double click – Microsoft hosted network virtual Adapter Select Driver and choose update drivers and update this driver, and Restart your PC.

 

Method 2: Enable Microsoft Hosted Network Virtual Adapter

Step 1: Keyboard press ( Windows+X ) select now Device Manager

Step 2: Click View – Select – show hidden device

Step 3: Expand the Network Adapters

Step 4: Choose – Microsoft hosted network virtual Adapter – Right Click– Enable this

Step 5: That s Ok.

Method 3: Turn on wifi

If you are on a laptop, you may have a dedicated key on your keyboard to turn on and turn off WiFi and Bluetooth. At times while pressing other keys, you may accidentally press the WiFi key and disable or turn off wireless adapter. So make sure that you have wireless connectivity turned on and try to start the hosted network.

Step 1: Also, check if you have enabled the Airplane Mode. Try to disable it and try again if enabled.

Step 2: Also, restart your PC once before attempting any other fixes as a temporary error can be resolved with a simple restart.

 

Method 4: Change Settings in Wireless Network Adapter Power Management Tab

Step 1: Keyboard press ( Windows+X ) select now Device Manager

Step 2: Click View – Click – show hidden device

Step 3: Expand the Network Adapters

Step 4: Choose Wireless Network Adapter and Right Click Select Properties Select power management

Step 5: Check mark the Allow the computer to turn off this device to save power

Step 6: And Click Ok

 

The hosted network couldn’t be started. The group or resource is not in the correct state to perform the requested operation. Here is vedo watch it here is guide How to fix The hosted network couldn’t be started

 

 

This 4 method follow and fix The hosted network couldn’t be started now and setting up your computer and you get back and try Hotspot network make. Good luck Here is full Guide Make a Computer Hotspot:

Make my Computer Or Laptop a Hotspot:

Step 1: Commant prompt type:  netsh wlan set hostednetwork mode=allow ssid=Hotspot key=password

Step 2: Commant prompt type:  netsh wlan start hostednetwork

Step 3: share now your internet Connection on hotspot network

 

Conclusion:

we hope this post is very Helpful The hosted network couldn’t be started. The group or resource is not in the correct state to perform the requested operation. please Leaves it Comments below!

 

1 Comment

1 Comment

  1. Business Service

    May 24, 2017 at 10:20 pm

    Well I truly liked reading it. This post provided by you is very useful for correct planning.

You must be logged in to post a comment Login

Leave a Reply

Most Popular

To Top